
Weak pressure at one tap usually means a local blockage; weak pressure everywhere usually means a supply problem. Working through these steps in order will save you a call out if it's the simple kind.
Start with the easy things
- Unscrew and clean tap aerators, limescale is the number one culprit.
- Check the internal stop tap is fully open.
- Ask the neighbours: if they're affected too, it's the water company's issue.
- If you have a water softener or filter, try bypassing it.
When it's the supply pipe
Old steel or lead supply pipes corrode and narrow over decades, and shared supplies split one connection between several homes. If pressure has faded gradually over years, and especially if it's worst upstairs, the supply pipe is the prime suspect. We can pressure-test the supply and, if it's the cause, replace it with new MDPE pipework, often using moling to minimise disruption.
Need a hand with this?
Our engineers cover all of Northampton daily and estimates are free. Request a quote or call +44 7883 387689.
