Find your stop tap before you need it

Home tips4 min read · 2 November 2026

Find your stop tap before you need it

The internal stop tap (also called a stopcock) shuts off the water supply to your whole home. When a pipe bursts, it is the single most important valve in the house, yet surveys regularly find a large share of homeowners either don't know where theirs is or can't turn it.

Where to look

  • Under the kitchen sink, the most common spot.
  • In the utility room, downstairs cloakroom or under the stairs.
  • In a cupboard near the front door, or in the garage.
  • In flats, look under the sink or in the hall riser cupboard.

Check it works (takes 30 seconds)

Turn the tap clockwise until it stops, then run the kitchen tap, the flow should slow to nothing. If the stop tap won't budge, don't force it hard enough to snap the spindle; a seized stop tap is a job for a plumber, and far better dealt with on a quiet Tuesday than during a flood.

Also locate the outside stop valve, usually under a small pavement or boundary cover. Water companies can shut the supply there if your internal tap fails.

Need a hand with this?

Our engineers cover all of Northampton daily and estimates are free. Request a quote or call +44 7883 387689.

CONTACT OUR TEAM